DIN-RAIL Energy Meter
/ 
-
Single Phase Two Wire -
OPTICAL, RS485, USB MICRO -
STS 2.O, DLMS/COSEM -
DLMS/COSEM HLS
HL9180 is a 35mm Din-Rail installed smart prepayment energy meter with a compact design and high anti-tampering function.
Functions：
35mm Din-Rail compact design
Built-in CIU tamper-proof unit
Communication options: PLC/RF/M-Bus
The intelligent version integrates GSM/GPRS
Independent sealed modem
External antenna for enhanced signal
Supports RF/PLC to DCU communication
Compatible with AMI system architecture
HL9300 three phase prepayment energy meter includes all the high functionality: four-quadrant metering; active, reactive, and apparent energy and demand measurements; standard event logs and time-of-use metering; and non-volatile memory for both billed and non-billed interval data.
Functions：
Supports PLC/RF/cellular communication；
Local/remote contactor control (IEC 62055-31 UC3)；
SMT process ensures manufacturing accuracy；
Load limit/credit depletion automatically triggered；
Full life cycle accuracy stability (DLMs protocol).
-
Electrical Specification
Reference voltage (Un) 220~240V Operation voltage 70% Un~120% Un Limit voltage 0% Un~190% Un Base current (Ib) 5A/10A Maximum current (Imax) 80A/100A Frequency 50Hz/60Hz Frequency range 47.5~52.5Hz Accuracy class CI.1 as per IEC 62053-21
CI.2 as per IEC 62053-23Starting current 0.4%Ib Pulse constant 1000imp/kWh
1000imp/kVARhIP Grade IP54 Utilization Class UC2 Connection Type Din Sequential -
EMC Specification
Electrostatic discharge Contact discharge: 8kV Fast transient burst 4 kV/100 kHz, IEC 61000-4-4 Immunity to HF Fields 80MHz-2GHz@10V/m with load Conducted disturbances 150kHz - 80MHz 10V/m, IEC 61000-4-6 Radio Interference CISPR 22, IEC 61000-4-2,3,4,6 Over-voltage 400VAC for 48 hours, IEC 62053021 Surge immunity 30kA/kV , 4/10µs, IEC 61000-4-5
